1990 harris-kayot ultima 20

nathan

Active Member
I figured that I would share my rebuild with everyone since I read so many on the checkmate forum.

my boat is a 1990 harris-kayot ultima 20 and the floor is gone. so I started to rebuild it.

yesterday I removed the seats and carpet.

100_4237.jpg


100_4238.jpg


100_4239.jpg


100_4240.jpg


100_4241.jpg


100_4242.jpg
 

nathan

Active Member
ok I got to do some more work on the floor before my wife went to work.* here is what I have done and what I found.

100_4245.jpg


100_4246.jpg


and here is why the floor was so bad on the passenger side.* water was trapped under the floor.

100_4247.jpg
 

nathan

Active Member
ok floor is out. the only rot is were the driver seat is. I am going to add some support because I am not putting the ski locker back in. then new floor.

100_4255.jpg


100_4256.jpg


100_4257.jpg


100_4258.jpg


100_4259.jpg


100_4260.jpg


100_4261.jpg


100_4262.jpg


100_4263.jpg
 

nathan

Active Member
well my wife was off yesterday so I spent most of the working on the floor and besides some trimming and sealing it is in.* I will say that these boats a put together not all that well.* it has two full length stringers on each side but they are made out of 1/2 inch thick ply wood.* I have a feeling that in time I will have to replace it all the stringers and at that time I will be re configuring the stringers and making all three (on each side) full length and thicker.* but either way here are pictures.

IMAG0161_zps8926b5ef.jpg


some with my helper

IMAG0162_zpsc4f3d013.jpg


IMAG0163_zpse79d161e.jpg
 
Top